Professional-Grade Fiberglass Mesh Tape for Drywall Systems

Self-adhesive fiberglass mesh tape engineered for seamless drywall joint coverage, crack repair, and permanent hole concealment with easy application and superior durability

Fiberglass mesh tape

Send Inquiry

8*8 inch

Self-adhesive mesh tape
Self-adhesive mesh tape

Introduction

Fiberglass Self-Adhesive Mesh Tape is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface.

It has properties of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tear, shrink or bubble, while it hides joints, cracks and holes permanently.

It is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface. It has properties of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tead, shrink or bubble, while it hides joints, cracks and holes permanently.

Specification

  • Mesh size: 8 x 8 (inch)
  • White, self-adhesive
  • Roll size: 50mm x 90M (300ft)
Mesh SizeYarm Tex (tex)Density
(Counts/25mm)		Treated Woven
Mass G/m2		Resin Content
%		Tensile strength (N/50mm)
WarpWeftWarpWeftWarpWeft
9 x 912.5 x 1 x 2999±0.59±0.575≥ 28≥ 400≥ 800
9 x 922 x 1 x 2459±0.59±0.575≥ 28≥ 700≥ 460
8 x 812.5 x 1 x 2998±0.58±0.565≥ 28≥ 360≥ 750
8 x 822 x 1 x 2458±0.58±0.563≥ 28≥ 600≥ 400

  • Color: White, Yellow, Blue…etc. but popular is white
  • Based on order, special specifications are also available.
  • Popular roll length: 45M & 90M

Construction

  • Step 1.
    Wall must be clean and dry.
    Apply the tape over the length of the joint and press firmly.
  • Step 2.
    Apply a generous first coat of compound over the tape and through the mesh. Make sure to completely filled, wipe off any excess compound with drywall knife and leave enough to cover the tape.
  • Step 3. Dry completely, then sand slightly.
  • Step 4. Apply sufficient thin finishing coats to produce a smooth wall surface.

Caution
Failure to completely fill the joint may result in cracking
For best results, use a setting-type compound.

Storage
Store in a cool and dry place. The best condition for storage is between 15°C and 35°C, and relative humidity is between 35% and 65%.
Store away from the direct contact with ground or concrete.
Store out of direct sunlight.
Protect rolls from weather and other damage.

Files Download

Best Sale

How can you reduce drywall finishing time while ensuring joints never crack, shrink, or bubble?

DOUGLAS fiberglass self-adhesive mesh tape eliminates pre-plastering steps and delivers permanent crack-free joints with superior tensile strength. Its easy-apply design and 8x8 inch mesh configuration accelerate installation across drywall partition systems, allowing contractors to complete projects faster without compromising quality. Request samples and specifications today to see how DOUGLAS mesh tape improves your finishing efficiency.

The self-adhesive fiberglass mesh tape represents an environmentally-friendly advancement in drywall finishing technology, reducing material waste and labor costs while delivering superior joint performance. Featuring a treated woven fiberglass composition with high tensile strength (≥600 N/50mm warp, ≥400 N/50mm weft) and ≥28% resin content, this mesh tape integrates seamlessly with standard joint compounds for flawless finishing. DOUGLAS's 39-year manufacturing heritage and advanced Tianjin production facilities ensure consistent quality and reliability across every roll. Contact our international sales team today to specify DOUGLAS fiberglass mesh tape for your next drywall partition or interior finishing project and experience the difference professional-grade materials deliver.

Hot Products