Fiberglass mesh tape
9*9 inch
Introduction
Fiberglass Self-Adhesive Mesh Tape is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface.
It has properties of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tear, shrink or bubble, while it hides joints, cracks and holes permanently.
It is widely used in covering drywall joints, cracks, and holes on drywalls, plasterboard, stucco and other surface. It has properties of easy to apply, no pre-plastering required, more environmentally-friendly job. It will not tead, shrink or bubble, while it hides joints, cracks and holes permanently.
Specification
- Mesh size: 9 x 9 (inch)
- White, self-adhesive
- Roll size: 50mm x 90M (300ft)
Mesh Size | Yarm Tex (tex) | Density (Counts/25mm) | Treated Woven Mass G/m2 | Resin Content % | Tensile strength (N/50mm) | |||
Warp | Weft | Warp | Weft | Warp | Weft | |||
9 x 9 | 12.5 x 1 x 2 | 99 | 9±0.5 | 9±0.5 | 75 | ≥ 28 | ≥ 400 | ≥ 800 |
9 x 9 | 22 x 1 x 2 | 45 | 9±0.5 | 9±0.5 | 75 | ≥ 28 | ≥ 700 | ≥ 460 |
8 x 8 | 12.5 x 1 x 2 | 99 | 8±0.5 | 8±0.5 | 65 | ≥ 28 | ≥ 360 | ≥ 750 |
8 x 8 | 22 x 1 x 2 | 45 | 8±0.5 | 8±0.5 | 63 | ≥ 28 | ≥ 600 | ≥ 400 |
- Color: White, Yellow, Blue…etc. but popular is white
- Based on order, special specifications are also available.
- Popular roll length: 45M & 90M
Construction
- Step 1.
Wall must be clean and dry.
Apply the tape over the length of the joint and press firmly. - Step 2.
Apply a generous first coat of compound over the tape and through the mesh. Make sure to completely filled, wipe off any excess compound with drywall knife and leave enough to cover the tape. - Step 3. Dry completely, then sand slightly.
- Step 4. Apply sufficient thin finishing coats to produce a smooth wall surface.
Caution
Failure to completely fill the joint may result in cracking
For best results, use a setting-type compound.
Storage
Store in a cool and dry place. The best condition for storage is between 15°C and 35°C, and relative humidity is between 35% and 65%.
Store away from the direct contact with ground or concrete.
Store out of direct sunlight.
Protect rolls from weather and other damage.
- Files Download