Products used in the project

Ceiling system

This project mainly uses the Mineral fiber ceiling tiles to fix with ceiling suspension grids for ceiling system.

Drywall partition system

The wall system in this project is Drywall partition system (Stud & Track as the frame) and then paper faced Gypsum boards, Magnesium Oxide boards, Calcium Silicate boards or Fiber Cement boards these kinds of wall boards could be chosen as desire to be installed on the both sides.

Fiberglass mesh joint tapes

After finishing the wall boards installed, the fiberglass mesh joint tapes and the joint compound is needed to finish the works.

Metal ceiling tile

The metal ceiling tile (lay-in) is to be selected and used in this project.
We could supply the metal ceiling tile in Aluminum or galvanized steel both materials.

Related Product Information

• 

  Mineral Fiber ceiling tile (Square edge)

  Pattern No: 112S / 114S / 115S / 118S / 120S

  ---

  DOUGLAS mineral fiber ceiling tiles are the high-grade acoustic ceiling tiles, with fine acoustical performance, the end users can effectively control and adjust the time of indoor mixed sound, noticeably improve sound quality and reduce noise.Our mineral fiber ceiling tiles are finished in White painting, provided in different specifications and patterns, thus delivering decorative effects with diversified artistic style. They also have different suspension modes that helps bring out the full functions in these suspension materials.In addition, our mineral fiber ceiling tiles are with excellent in-combustibility, can satisfy every requirement on fire safety in all kinds of buildings such as hotels, restaurants, gymnasiums, office buildings, airports and home decoration.

  ---

• 

  Ceiling suspension grid (T-24/Heavy Duty)

  Heavy duty

  ---

  DOUGLAS ceiling suspension grids are double web cold-rolled sections, manufactured from hot-dipped galvanized steel, conforms to JIS G3302 SGCC. The tees section is with pre-painted capped. We use only the high quality level galvanized steel also pre-painted galvanized steel supporting with high performance production equipment, to ensure the accurate sizes and locking quality.The Main Runner is slotted for cross tees at 150mm or 6" centers to give maximum flexibility in the ceiling lay out.We are holding the 3rd party issued test report which was tested under ASTM C635 to tell its good loading capacity.

  ---

• 

  Drywall partition system

  Pattern No: Stud 50

  ---

• 

  Magnesium Oxide Board

  ---

  MGO board

  ---

• 

  Cement fiber board

  ---

• 

  Fiberglass mesh tape

  8*8 inch

  ---

• 

  Joint compound

  ---

---